Table of Contents
Advertisement
Opening the blade server cover
The following illustration shows how to open the cover on the blade server.
Blade-cover
release
Complete the following steps to open the blade server cover:
1. Read the safety information beginning on page vii and "Installation guidelines" on page 17.
2. Carefully lay the blade server down on a flat, non-conductive surface, with the cover side up.
3. Press the blade-cover release on each side of the blade server and lift the cover open, as shown in
the illustration.
4. Lay the cover flat, or lift it from the blade server and store for future use.
Statement 21:
xx CAUTION:
Hazardous energy is present when the blade server is connected to the power source. Always
replace the blade cover before installing the blade server.
20
Blade-cover
release
Intel® Server Compute Blade SBX82: Hardware Maintenance Manual and Troubleshooting Guide
Advertisement
Table of Contents
