No-beep symptoms
NOTE
See "System" on page 130 to determine which components should be replaced by a field
service technician.
No-beep symptom
No beep and the system
operates correctly.
No beep and no video
(System error LED is OFF)
No beep and no video
(System Attention LED is ON)
Diagnostic error codes
NOTE
In the following error codes, if XXX is 000, 195, or 197, do not replace a FRU. The
description for these error codes are:
000
The test passed.
195
The Esc key was pressed to stop the test.
197
Warning; a hardware failure might not have occurred.
For all error codes, replace the FRU or take the action indicated.
•
System board assembly
•
See "Undetermined problems" on page 126.
•
See "Light Path Diagnostics" on page 70.
FRU/action
99