Table of Contents
Advertisement
NOTE
See "System" on page 130 to determine which components should be replaced by a field
service technician.
Error code/symptom
166-406-001 System Management:
Failed (BMC indicates failure in I2C bus
test.)
166-407-001 System Management:
Failed (BMC indicates failure in I2C bus
test.)
166-NNN-001 System Management:
Failed (BMC indicates failure in self
test, where NNN=300 to 320.)
166-NNN-001 System Management:
Failed (BMC indicates failure in I2C bus
test, where NNN=400 to 420 (excluding
406 and 407).)
180-XXX-000 (Diagnostics LED failure) •
180-XXX-001
(Failed front LED panel test)
180-XXX-002
(Failed diagnostics LED panel test)
180-XXX-003
(Failed system board LED test)
180-XXX-005
(Failed SCSI backplane LED test)
201-XXX-0nn
(Failed memory test.)
201-XXX-n99
(Multiple DIMM failure, see error text)
NOTE
n = number of failing pair.
1. Remove blade server, wait 30 seconds, reinsert the blade
server, and retry.
2.
Reflash or update firmware for BMC.
3.
SCSI storage expansion unit.
4.
System board assembly.
1. Remove blade server, wait 30 seconds, reinsert the blade
server, and retry.
2.
Reflash or update firmware for BMC.
3.
Operator information panel cable.
4.
Operator information panel.
5.
System board assembly.
1. Remove blade server, wait 30 seconds, reinsert the blade
server, and retry.
2.
Reflash or update firmware for BMC.
3.
System board assembly.
1. Remove blade server, wait 30 seconds, reinsert the blade
server, and retry.
2.
Reflash or update firmware for BMC.
3.
System board assembly.
Run diagnostics panel LED test for the failing LED.
1. Front bezel with customer interface card
2.
System board assembly
•
System board assembly
•
System board assembly
1. SCSI storage expansion unit
2.
System board assembly
1. DIMM Location slots 1-4 where nn = DIMM
location.
NOTE
nn
1=DIMM 1; 2=DIMM 2; 3=DIMM 3; 4=DIMM 4.
2.
System board assembly.
1. See error text for failing DIMMs.
2.
System board assembly.
FRU/action
101
Advertisement
Table of Contents
