Table of Contents
Advertisement
NOTE
See "System" on page 130 to determine which components should be replaced by a field
service technician.
Error code/symptom
001-250-000
(Failed processor board ECC)
001-292-000 (Core system:
failed/CMOS checksum failed)
001-XXX-000
(Failed core tests)
001-XXX-001
(Failed core tests)
005-XXX-000
(Failed video test)
030-XXX-000
(Failed internal SCSI interface test)
035-XXX-099
075-XXX-000
(Failed power supply test)
089-XXX-001
(Failed microprocessor test)
089-XXX-002
(Failed optional microprocessor test)
165-060-000 (Service Processor: ASM
may be busy)
165-198-000 (Service Processor:
Aborted)
165-201-000 (Service Processor:
Failed)
165-330-000 (Service Processor:
Failed)
165-342-000 (Service Processor:
Failed)
100
•
System board assembly
•
Load BIOS defaults and rerun test.
•
System board assembly
•
System board assembly
•
System board assembly
1. SCSI storage expansion unit
2.
System board assembly
1. No adapters were found.
2.
If adapter is installed re-check connection.
•
Power supply
1. Microprocessor 1
2.
System board assembly
1. Optional microprocessor 2
2.
System board assembly
1. Rerun the diagnostic test.
2.
Fix other error conditions that may be keeping ASM busy.
Refer to the error log and diagnostic panel.
3.
Power down blade server and reseat it in chassis.
4.
System board assembly.
1. Rerun the diagnostic test
2.
Fix other error conditions that may be keeping ASM busy.
Refer to the error log and diagnostic panel.
3.
Power down blade server and reseat it in chassis.
4.
System board assembly.
1. Power down blade server and reseat it in chassis.
2.
System board assembly.
•
Update to the latest ROM diagnostic level and retry.
1. Ensure latest firmware levels for ASM and BIOS are
installed.
2.
Power down blade server and reseat it in chassis.
3.
System board assembly.
Intel® Server Compute Blade SBX82: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
Advertisement
Table of Contents
