Table of Contents
Advertisement
NOTE
See "System" on page 130 to determine which components should be replaced by a field
service technician.
Symptom
Mouse function lost during
Red Hat installation.
NOTE
See "System" on page 130 to determine which components should be replaced by a field
service technician.
Symptom
The amount of system
memory displayed is less
than the amount of physical
memory installed.
114
Keyboard, mouse, or pointing-device problems
FRU/action
•
If, while installing Red Hat Linux 7.3 to a blade server, you or someone
else selects a different blade server as owner of the keyboard, video, and
monitor (KVM), you might lose mouse function for the installation process.
Do not switch KVM owners until the installation process begins to install
the packages (after the 'About to Install' window).
Memory problems
FRU/action
1. Verify that:
•
The memory modules are seated properly.
•
You have installed the correct type of memory.
•
If you changed the memory, you updated the memory configuration
with the Configuration/Setup Utility program.
•
All banks of memory on the DIMMs are enabled. The computer might
have automatically disabled a DIMM bank when it detected a
problem or a DIMM bank could have been manually disabled.
2.
Check POST error log for error message 289:
•
If the DIMM was disabled by a system-management interrupt (SMI),
replace the DIMM.
•
If the DIMM was disabled by the user or by POST:
a.
Start the Configuration/Setup Utility program.
b.
Enable the DIMM.
c.
Save the configuration and restart the computer.
3.
DIMM.
4.
System board assembly.
Intel® Server Compute Blade SBX82: Hardware Maintenance Manual and Troubleshooting Guide
Advertisement
Table of Contents
