Upgrading From Zenworks 7.2 Linux Management With Ir1 Or Zenworks 7.2 Linux Management; With Ir1 - Dell Edition To Zenworks 7.3 Linux Management; Upgrading The Servers - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

11.6 Upgrading from ZENworks 7.2 Linux
Management with IR1 or ZENworks 7.2 Linux
Management with IR1 - Dell Edition to ZENworks
7.3 Linux Management
The following sections provide information to upgrade from ZENworks 7.2 Linux Management
with IR1 or ZENworks 7.2 Linux Management with IR1 - Dell Edition to ZENworks 7.3 Linux
Management.
Section 11.6.1, "Upgrading the Servers," on page 95
Section 11.6.2, "Upgrading the Managed Device," on page 96

11.6.1 Upgrading the Servers

1 Before performing the upgrade, do the following:
Take a reliable backup of your object and data stores, and eDirectory. For more
information, see
ZENworks 7.3 Linux Management Administration
Ensure that eDirectory is listening on port 10389.
Take an image of the ZENworks servers.
Ensure that the ZENworks Linux Management server and the server on which the Oracle
or the PostgreSQL database is running are in time sync.
Remove Openldap2 server package from the ZENworks Server, if it is installed on
platforms other than RHEL 4.
1. To verify whether Openldap2 has been installed, execute
openldap2
2. To remove Openldap2, execute
2 If the ZENworks 7.3 Linux Management server has OES2 devices registered, apply TID
3073502. For more information, see TID 3073502 in the
(http://support.novell.com/search/kb_index.jsp).
3 Perform an in-place upgrade on the ZENworks Primary Server. For more information, see
Section 11.1.1, "Performing an In-Place Upgrade on the ZENworks Primary Server," on
page 83.
WARNING: While upgrading from ZENworks 7.2 Linux Management to ZENworks 7.3
Linux Management on a SUSE Linux Enterprise Server or Red Hat Enterprise Linux Server
platforms, do not modify the default content of the
Linux Management Server. If you edit the file, the Novell eDirectory 8.8.3 packages are not
completely updated.
4 Perform an in-place upgrade on the ZENworks Secondary Server. For more information, see
Section 11.1.2, "Performing an In-Place Upgrade on a ZENworks Secondary Server," on
page 84.
"ZENworks Object Store and Data Store
at the server console prompt. This displays the installed package version.
rpm -e openldap2
Maintenance" in the
Guide.
rpm -qa /grep
.
Novell Support Knowledgebase
file located on the ZENworks
/etc/issue
Upgrading to ZENworks 7.3 Linux Management
Novell
95