Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 56

./zlm-install -o
The
specific to Dell PowerEdge servers in ZENworks Linux Management.
If you install the ZENworks Agent using the
Linux Management Dell functionality until you have completed the configuration steps in
Section 7.4, "Enabling Dell PowerEdge Support," on page
NOTE: The steps in this procedure perform a standard installation of ZENworks Linux
Management. Depending on your situation, additional options can be used with the
install
page 121.
If you do not have the X Window System installed (for example, you installed a Minimal
installation of SUSE Linux Enterprise Server 9), see
4 When prompted to install ZENworks, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
Installation of the ZENworks Agent software begins.
6 The installation checks whether the device is already registered to a ZENworks service, and
prompts you to retain the existing registered ZENworks service.
If you enter
7 Provide the appropriate responses to the following prompts to register the device:
Registration Server Address: Enter the IP address or DNS name of the ZENworks
Server that you want to manage this device. This can be the Primary Server or a
Secondary Server, and should be the server that has best network access to the device.
If you leave this field blank, no service is added. You can register the device at a later time
by using the rug command line interface.
For SUSE Linux Enterprise Server 10 (SLES 10) and SUSE Linux Enterprise Desktop 10
(SLED 10) devices:
/usr/bin/rug sa https://ZEN_Server_address
For SUSE Linux Enterprise 11 (SLES 11) and SUSE Linux Enterprise Desktop 11 (SLED
11) devices:
/usr/bin/rug sa https://ZEN_Server_address
For other managed devices:
/opt/novell/zenworks/bin/rug sa https://ZEN_Server_address
(Optional) Registration Server Key: You can leave this field blank. ZENworks has two
default registration rules, one for servers and one for workstations. If you leave this field
blank, ZENworks uses one of the two default registration rules to register the device. The
rules cause the device to be added to either the
folder with the device's hostname used for its device name.
Before installing the ZENworks Agent on a large number of devices and registering them,
you should create registration keys and rules that enable you to place devices in specific
folders and groups. Using folders and groups reduces the effort required to manage a large
56 Novell ZENworks 7.3 Linux Management Installation Guide
option installs the OEM module for Dell hardware required to use the features
-o
command. For more information, see
to accept the agreement.
Y
, the installation is completed. Skip to
y
If you enter , continue with
n
option, you cannot use the ZENworks
-o
Section A.1, "Installation Options," on
"-x" on page
to continue.
Y
Step
Step 7.
/Servers
63.
zlm-
122.
8.
folder or the
/Workstations