Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 27

Item Requirement
Operating SLES 10 SP3 on the 32-bit (x86) and 64-bit
systems (x86_64) architectures
additionally
SLED 10 SP3 on the 32-bit (x86) and 64-
supported
bit (x86_64) architectures
for IR1
Novell Linux Desktop 9 SP4 on the 32-bit
(x86) and 64-bit (x86_64) architectures
RHEL 4 AS on s390 and s390x
architectures.
RHEL 5.2 and RHEL 5.3 on the 32-bit
(x86) and 64-bit (x86_64) architectures.
RHEL 5.3 on the zSeries (s390x)
architecture.
Operating Novell Open Enterprise Server 2 SP2 on
systems the 32-bit (x86) and 64-bit (x86_64)
additionally architectures.
supported
RHEL 5.4 on 32-bit (x86), 64-bit (x86_64),
for IR2
and Zseries (s390x) architectures.
Operating The following versions of the OpenIPMI driver
System for are required to support the Dell Update Package
Dell functionality:
PowerEdge
SLES 10: OpenIPMI-1.4.26-9.4 or newer
Servers
SLES 9.3: OpenIPMI-36.7 or newer
RHEL4: OpenIPMI-33.12 or newer
RHEL3: OpenIPMI-35.12 or newer
Additionally, the following version of the
OpenIPMI driver is supported in ZENworks 7.3
Linux Management with IR1:
SLES 11: OpenIPMI-2.0.14-1.25 or newer
Additional information
If you plan to manage Dell PowerEdge
servers by using ZENworks 7.3 Linux
Management, the Dell PowerEdge
Software Support Matrix lets you identify
operating systems and Dell
OpenManage software that your
PowerEdge system supports. You can
view the Support Matrix on the
Support site (http://support.dell.com/
support/edocs/software/smsom/6.1/en/
peosom/installa.htm#wp999358).
System Requirements
Dell
27