Supplying Your Product License Code - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Service
Novell ZENworks Management Daemon
Novell Imaging Agent
For example, if the Novell ZENworks Management Daemon is not running, use the
following command to start it:
/etc/init.d/novell-zmd start
For additional information about the ZENworks services, see
Novell ZENworks 7.3 Linux Management Administration
14b (Conditional) If you are using the PostgreSQL database, confirm that it is running by
using the following command at the database server:
/etc/init.d/postgresql status
14c Access the ZENworks Control Center using a Web browser that meets the requirements
listed in Section 2.4, "Administration Workstation Requirements," on page
following URL to access the Control Center:
https://ZENworks_Primary_Server_Address
Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the
Primary Server.
The ZENworks Control Center requires an https:// connection; requests to http:// are
redirected to https://.
When prompted for login credentials, use the Administrator user with the password you
provided during the installation.
After you are in the Control Center, you can click the Devices tab, then click the Servers
folder to view your ZENworks Primary Server.
15 After successfully installing the ZENworks Server components, take a reliable backup of the
following files:
/etc/opt/novell/zenworks/hibernate.cfg.xml
/etc/opt/novell/zenworks/tomcat/base/server.xml
/etc/opt/novell/zenworks/serversecret
16 (Conditional) Ensure that the ZENworks Linux Management server and the server on which
the Oracle or the PostgreSQL database is running are in time sync.
17 Continue with the next section,

5.3 Supplying Your Product License Code

Your ZENworks system is installed with a 90-day evaluation license. For your system to continue to
work after 90 days, you need to supply your product license. To do so:
1 Access the ZENworks Control Center using the following URL:
https://ZENworks_Primary_Server_Address
Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the Primary
Server.
2 Click the Configuration tab.
Service Name
novell-zmd
novell-zislnx
Supplying Your Product License
"ZENworks Services" in the
Guide.
29. Use the
Code.
Installing the ZENworks Primary Server 45