Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 112

mount -o loop /tempfolderpath/isomimagename.iso mountpoint
Replace
the path to the file system location where you want to mount the image. The path specified by
mountpoint
For example:
mount -o loop /zlm73/ZEN73_LinuxMgmt.iso /zlm73/install
3 Log in as
command:
./zlm-upgrade
4 When prompted to upgrade ZENworks Linux Management, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
6 Enter
Make sure all ZENworks services on Secondary Servers are stopped. You can execute
novell/zenworks/bin/zlm-config --stop
Servers.
7 Press Enter to continue.
The upgrade program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then upgrades the database schema.
8 (Conditional) If you have ZENworks Secondary Servers to upgrade, continue with
an In-Place Upgrade on a ZENworks Secondary Server" on page
9 Continue with
Performing an In-Place Upgrade on a ZENworks Secondary Server
You must upgrade the ZENworks Primary Server before upgrading the ZENworks Secondary
Servers. For step-by-step information, see
on page 111.
1 Start all ZENworks Services on the Secondary Server by running the
command.
2 Make sure the server meets the requirements. See
Requirements," on page
3 At the Linux server, mount the Novell ZENworks 7.3 Linux Management with Interim Release
2 Server media by using the
For example,
If you are using an ISO image rather than a physical media, copy the ISO to a temporary folder
on the Linux server, then mount the image using the following command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
Replace tempfolderpath with the path to the temporary folder and replace mountpoint with the
path to the file system location where you want to mount the image. The path specified by
mountpoint must already exist.
For example:
mount -o loop /zlm73/ZEN73_LinuxMgmt.iso /zlm73/install
112 Novell ZENworks 7.3 Linux Management Installation Guide
with the path to the temporary folder and replace
tempfolderpath
must already exist.
, then start the upgrade program from the mount point by running the following
root
to accept the agreement.
Y
when you are asked if you are upgrading a ZENworks Primary Server.
Y
"Upgrading Managed Devices Manually" on page
23.
mount device mountpoint
mount /dev/cdrom /zlm73
to shut down the services on Secondary
"Upgrading Servers by Performing an In-Place Upgrade"
Section 2.1, "ZENworks Server
command.
.
with
mountpoint
to continue.
Y
/opt/
"Performing
112.
113.
zlm-config --start