Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 115

6 In the Scriptable action drop-down list, select Pre-Installation.
7 In the Script to run drop-down list, select Define your own script.
8 Paste the contents of the
access the script file from the
7.3 Linux Management with IR2 is mounted. For example, if ZENworks 7.3 Linux
Management with IR2 is mounted on
resides in the
/zlm73/install/data
If the managed device has bundle locks or package locks (
Installation script takes a backup of the bundle locks or package locks and places the backup in
the directory.
/tmp/zmd
9 Click OK.
10 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
11 In the Scriptable action drop-down list, select Post-Installation.
12 In the Script to run drop down list, select Define your own script.
13 Paste the contents of the
access the script file from the
7.3 Linux Management with IR2 is mounted. For example, if ZENworks 7.3 Linux
Management with IR2 is mounted on
resides in the
/zlm73/install/data
NOTE: In the
post-install.sh
upgrade are commented out by default. If you want the messages to be displayed on the
managed device, uncomment the messages.
The Post Installation script performs the following tasks:
Restores the bundle locks and package locks backup from the
appropriate directories.
Creates the
/tmp/zmd/upgrade_final.sh
service, removes the system catalogs, and restarts the service.
Uses the atd server to assign a scheduled task and execute the
script two minutes after the
14 Click OK.
15 Click Apply at the bottom of the Details page.
16 In the RPM Package Bundle Settings section of the Details page, click Deploy to deploy the
new version of the bundle.
17 Continue with
"Creating Catalogs for Upgrade Bundles" on page
Creating Catalogs for Upgrade Bundles
1 In ZENworks Control Center, click the Bundles tab.
2 Click New, then click Catalog to open the Create New Catalog Wizard.
3 Specify a name for the catalog, then click Next to display the Catalog Attributes page.
4 Click Next to display the Summary page.
5 On the Summary page, click Next.
script file into the Script content box. You can
pre-install.sh
directory located within the directory on which ZENworks
/data
/zlm73/install
directory.
script file into the Script content box. You can
post-install.sh
directory located within the directory on which ZENworks
/data
/zlm73/install
directory.
script file, the messages indicating the progress of the
shell script that automatically stops the zmd
post-install.sh
Upgrading to ZENworks 7.3 Linux Management with IR2 115
, the
pre-install.sh
package-locks.xml
, the
post-install.sh
/tmp/zmd
upgrade_final.sh
has completed execution.
115.
script file
), the Pre-
script file
directory to the
shell