Setting Up The Open Enterprise Server 1 After Installing Zenworks Linux Management - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

10 Accept the license agreement and click Next.
11 Click Software > Package Selection.
12 Click Configure.
13 Filter the packages based on patterns and select the required patterns.
14 Click Accept.
15 Select File > Save as and save the updated AutoYast configuration file.
7.2.4 Using the Default ZENworks Linux Management Agent to
Install the ZENworks Agent
A default instance of the ZENworks Linux Management agent is available on SLES 10 and SLED
10 managed devices. You can use it to install the ZENworks agent.
1 Create an upgrade bundle. For more information on how to create an upgrade bundle, see
"Creating an Upgrade Bundle" on page
2 Create a script for the upgrade bundle. For more information on how to create a script for the
upgrade bundle, see
3 Create a catalog for the upgrade bundle. For more information on how to create a catalog for an
upgrade bundle, see
4 Upgrade the SLES 10 or the SLED 10 managed device by using the upgrade bundle. For more
information, see "Upgrading SLES 10 or SLED 10 Managed Devices by Using an Upgrade
Bundle" on page 88.
7.3 Setting Up the Open Enterprise Server 1 after
Installing ZENworks Linux Management
If you want to configure any other Novell products on the Novell Open Enterprise Server 1/SP1/SP2
after installing the ZENworks 7.3 Linux Management Agent, you must first remove the entries for
the earlier version of rug, rcd, and red-carpet from
by using a Text File policy.
novell-base.sel
1 Log into ZENworks Control Center.
2 Click the Policies tab.
3 In the Policies list, click New, then click Policy to display the Create New Policy page.
4 In the Policy Type list, click Text File Policy, then click Next to display the Policy Name page.
5 Fill in the fields:
Policy name: (Required) Provide a unique name for the policy. The name you provide
displays in the ZENworks Control Center interface, which is the administrative tool for
ZENworks Linux Management.
Folder: (Required) Type the name or browse to the folder that this policy will be created
in. Folders display in the ZENworks Control Center.
Description: Provide a short description of the policy. This description displays on the
policy's Summary page in the ZENworks Control Center interface.
6 Click Next to display the General page.
7 Configure the following settings:
86.
"Creating a Script for Upgrade Bundles" on page
"Creating Catalogs for Upgrade Bundles" on page
86.
/opt/novell/oes_install/selections/
87.
Setting Up Managed Devices 61