Upgrade Options - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

After the upgrade completes, you can verify that the upgrade was successful by executing the
rug ping
is 7.3.0. If you perform the
message. You can recover by stopping and restarting zmd. The
contain the
4 If the device does not have the X Window System installed:
4a In ZENworks Control Center, click the upgrade bundle.
4b Click the Details tab.
4c In the Packages panel, select the following packages:
novell-zenworks-x11vnc-0.6.1-2
novell-zenworks-zmd-gconfpolicyenforcers-7.3.0-0
novell-zenworks-tightvnc-1.2.9-6, zen-updater-7.3.0-0
4d Click Action > Set Freshen.
5 (Optional) If SLES 10 or SLED 10 are running on Dell server and the managed devices have
the default zmd agent installed, do the following if you want to collect the Dell inventory of the
devices:
5a In the Packages panel, select novell-zenworks-zmd-oem.
5b Click Action > Unset Freshen.
Upgrading Managed Devices by Using the Hot Patch 2 Channel
Upgrading managed devices to ZENworks 7.3 Linux Management with IR1 installs the new
ZENworks Agent.
1 Apply ZENworks 7.3 Linux Management Hot Patch 2. For more information on how to obtain
and apply the Hot Patch, see TID 7003346 at

12.2 Upgrade Options

The following options can be used with the
Option
-a
-b
If you are installing ZENworks Linux Management rather than performing an upgrade from a
previous version, installation options are available for use with the
more information, see
108 Novell ZENworks 7.3 Linux Management Installation Guide
command or refer to upgrade.log. The upgrade was successful if the version of zmd
rug ping
"Starting ZENworks Management Daemon..."
Description
Upgrades the ZENworks Agent on a managed device.
Creates bundles that can be used to upgrade ZENworks Linux Management devices.
This option must be executed only on the ZENworks Primary Server.
Section A.1, "Installation Options," on page
command prematurely, you receive an exception
/tmp/zmd/upgrade.log
Novell Support (http://www.novell.com/support).
command:
zlm-upgrade
zlm-install
121.
message in the last line.
command. For
must