Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 55

2 At the Linux device, mount the media you are using for the install:
Novell ZENworks 7.3 Linux Management Agent CD
Novell ZENworks 7.3 Linux Management with Interim Release 1 Agent CD
Novell ZENworks 7.3 Linux Management with Interim Release 2 Agent CD
Or
ISO image
The ISO image of ZENworks 7.3 Linux Management is available at the
Downloads Web site
The ISO image of ZENworks 7.3 Linux Management with IR1 / IR2 is available at the
Novell Downloads Web site
To mount a media, use the following command:
mount device mountpoint
For example:
mount /dev/cdrom /zlm73
If you are using an ISO image rather than a physical media, copy the ISO to a temporary folder
on the Linux device, then mount the image using the following command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
Replace tempfolderpath with the path to the temporary folder and replace mountpoint with the
path to the file system location you want to mount the image. The path specified by mountpoint
must already exist.
For example:
mount -o loop /zlm73/ZENworks_Agent.iso /zlm/install
3 Log in as root, then start the installation program:
IMPORTANT: If you want to install ZENworks 7.3 Linux Management on a SUSE
Enterprise 11 GM device, you can install it from the text mode console (tty) rather than the X-
session of the device. To install it by using the X-session of the device, update the gpg2
package with gpg2 2.0.9-25.25.1 version or later and the gpg2-lang package with gpg2-lang
2.0.9-25.25.1 version or later. For more information, see "Upgrade" in the
Linux Management with Interim Release 2 Readme (http://www.novell.com/documentation/
zlm73/readme/readme_zlm_73_ir2.html).
For Workstations and Servers that are Not Dell PowerEdge Servers: If you are
installing the ZENworks Agent on a workstation or a server that you do not want to
manage using the ZENworks Linux Management features specific to PowerEdge servers
(on a server that is not a Dell PowerEdge server, for example), start the installation from
the mount point using the following command:
./zlm-install -a
The option installs only agent portions of ZENworks Linux Management. The
-a
option is optional because the agent iso, however, installs only the agent component.
For Dell PowerEdge Servers: If you are installing the ZENworks Agent on a Dell
PowerEdge server that you want to manage using the ZENworks Linux Management
features specific to PowerEdge servers, start the installation program from the mount point
using the following command:
(http://download.novell.com/Download?buildid=qXhwtS89PvQ~).
(http://download.novell.com/index.jsp).
Novell
®
Linux
ZENworks 7.3
-a
Setting Up Managed Devices 55