Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 86

4. "Upgrading Managed Devices Other Than SLES 10 and SLED 10 by Using an Upgrade
Bundle" on page 87
5. "Upgrading SLES 10 or SLED 10 Managed Devices by Using an Upgrade Bundle" on page 88
Creating an Upgrade Bundle
1 On the ZENworks Linux Management server, mount the agent ISO by using the following
command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
2 Run the
Management server.
The command lists the platforms for which you can create the upgrade bundle.
3 Type the desired platform and press Enter.
Creating a Script for Upgrade Bundles
1 In the ZENworks Control Center, click the Bundles tab.
2 Click the folder that you created while performing an in-place upgrade on the ZENworks
Primary Server to hold the upgrade bundles.
3 Click the underlined name of the desired upgrade bundle to display its details.
4 Click the Details tab.
5 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
6 In the Scriptable action drop-down list, select Pre-Installation.
7 In the Script to run drop-down list, select Define your own script.
8 Paste the contents of the
access the script file from the
7.3 Linux Management is mounted. For example, if ZENworks 7.3 Linux Management is
mounted on
install/data
If the managed device has bundle locks or package locks (
Installation script takes a backup of the bundle locks or package locks and places the backup in
the
/tmp/zmd
9 Click OK.
10 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
11 In the Scriptable action drop-down list, select Post-Installation.
12 In the Script to run drop down list, select Define your own script.
13 Paste the contents of the
access the script file from the
7.3 Linux Management is mounted. For example, if ZENworks 7.3 Linux Management is
mounted on
install/data
86 Novell ZENworks 7.3 Linux Management Installation Guide
command to create an upgrade bundle on the ZENworks Linux
./zlm-upgrade -b
pre-install.sh
/data
, the
/zlm73/install
directory.
directory.
post-install.sh
/data
, the
/zlm73/install
directory.
script file into the Script content box. You can
directory located within the directory on which ZENworks
script file resides in the
pre-install.sh
package-locks.xml
script file into the Script content box. You can
directory located within the directory on which ZENworks
script file resides in the
post-install.sh
/zlm73/
), the Pre-
/zlm73/