Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual page 114

mount -o loop /zlm73/ZEN73_LinuxMgmt.iso /zlm73/install
3 Log in as
command:
./zlm-upgrade
4 When prompted to upgrade ZENworks Linux Management, enter
5 Review the Software License Agreement, pressing Page Down to scroll down the page, then
enter
The install program stops ZENworks services, subscribes to the upgrade channels, upgrades
RPMs, upgrades zmd, runs upgrade scripts, and then restarts the ZENworks services.
Upgrading Managed Devices by Using Upgrade Bundles
Upgrading managed devices to ZENworks 7.3 Linux Management with IR2 installs the new
ZENworks Agent.
Make sure the managed device meets the requirements. See
Requirements," on page
Complete the following tasks in the order listed:
1. "Creating an Upgrade Bundle" on page 114
2. "Creating a Script for Upgrade Bundles" on page 114
3. "Creating Catalogs for Upgrade Bundles" on page 115
4. "Upgrading Managed Devices Other Than SLES 10 and SLED 10 by Using an Upgrade
Bundle" on page 116
5. "Upgrading SLES 10 or SLED 10 Managed Devices by Using an Upgrade Bundle" on
page 117
Creating an Upgrade Bundle
1 On the ZENworks Linux Management server, mount the agent ISO by using the following
command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
2 Run the
Management server.
The command lists the platforms for which you can create the upgrade bundle.
3 Type the desired platform and press Enter.
Creating a Script for Upgrade Bundles
1 In ZENworks Control Center, click the Bundles tab.
2 Click the folder that you created while performing an in-place upgrade on the ZENworks
Primary Server to hold the upgrade bundles.
3 Click the underlined name of the desired upgrade bundle to display its details.
4 Click the Details tab.
5 In the Scriptable Actions section at the bottom of the Details page, click New to display the
New Scriptable Action dialog box.
114 Novell ZENworks 7.3 Linux Management Installation Guide
, then start the upgrade program from the mount point by running the following
root
to accept the agreement.
Y
25.
command to create an upgrade bundle on the ZENworks Linux
./zlm-upgrade -b
to continue.
Y
Section 2.3, "Managed Device