Changing The Default Ports For The Zenworks Handheld Management Access Point And The Handheld Devices Communication - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

2c Click OK.
3 Configure the ZENworks Handheld Management Access Point to connect to the new ports.
3a Run
3b Select Operations > Configure > Server Communication.
3c Deselect the Use Default Port check box.
3d Specify the desired port that you want the ZENworks Handheld Management Access
Point to use for communicating with the ZENworks Handheld Management server.
3e Click OK.
B.4 Changing the Default Ports for the ZENworks
Handheld Management Access Point and the
Handheld Devices Communication
1 Launch
2 In the Configure IP - ZENworks Handheld Management Access Point dialog box, do the
following:
2a Deselect the Use Default Ports check box
2b Specify the desired TCP, SSL, HTTP, and HTTPS ports that you want the ZENworks
Handheld Management Access Point to use.
164 Novell ZENworks 7 Handheld Management Administration Guide
from the
console.exe
from directory.
cfgip.exe zfhap
directory.
zfhap