Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual page 70

NOTE: The password set on a Symbol device is not case sensitive.
5b Configure the following Pocket PC Options, which lets you specify enhanced security
options for Pocket PCs. The options in this group box are disabled unless you check
Require a Password to Be Set on the Handheld.
70 Novell ZENworks 7 Handheld Management Administration Guide
Password Matches a Novell eDirectory User Password: Select this option to set a
user's network (eDirectory) password as the device password.
WARNING: If you forget your network password, you cannot access the Handheld
device. You can access the device only by Hard Reset but this erases all data on the
device.
Additional Password Settings: Select this option to specify enhanced password
support settings for Pocket PCs.
For Pocket PCs, where enhanced security like biometric is not supported by the
device, if you select Enable Enhanced Password Support, ZENworks Handheld
Management displays it's own password dialog box instead of default Windows CE
dialog box.
IMPORTANT: For Pocket PCs, where the device supports enhanced security, if you
select Enable Enhanced Password Support, ZENworks Handheld Management
displays a dialog box saying that a password must be set on the device. In that case,
the default Windows CE dialog box is shown.
The Enable Enhanced Password Support option does not function on handheld PCs.
If, in the future, you want to remove the ZENworks Handheld Management password
applet and restore the original Windows CE password applet, you need to reconfigure
the WinCE Security policy and disable the Enable Enhanced Password Support