Configuring A Handheld Application Object - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

The object's name must conform to the following rules:
The name must be unique in the container.
Special characters are allowed. However, plus (+), equals (=), and period (.) must be
preceded by a backslash (\) if used.
Uppercase and lowercase letters, as well as underscores and spaces, are displayed as you
first entered them, but they aren't distinguished. For example,
ZENworks_Handheld_Management and ZENWORKS_HANDHELD_MANAGEMENT
are considered identical.
4 Click OK.

4.2.2 Configuring a Handheld Application Object

1 In ConsoleOne, right-click the newly created Handheld Application object, then click
Properties to display the General page.
2 Type a description of the Handheld Application object, if desired.
This description is available by viewing the properties of the object in ConsoleOne; users do
not see this description during distribution.
3 Click the Calendar/Clock icon to specify a date and time that the application object is available
for distribution.
If you do not change this setting, the object is distributed the next time the device connects to
the ZENworks Handheld Management Access Point.
4 Select the Expires On option, then specify a date and time that the application object is no
longer be available for distribution.
100 Novell ZENworks 7 Handheld Management Administration Guide