Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual page 58

7b In the Add Application dialog box, type or browse to the software that you want to
uninstall.
IMPORTANT: If you manually type the software name, make sure to type the name
exactly as it appears in the Remove Programs settings of the Windows CE device.
7c Click OK.
7d Click Apply.
8 On the Power page, make the desired configuration changes, then click Apply.
NOTE: The Power settings do not apply to HP Jornada devices running MicrosoftPocket PC
2002 software.
The External Power settings do not apply to Handheld PC.
If you select the Don't Change setting, ZENworks Handheld Management does not change that
setting on associated devices; the corresponding setting on each device determines its behavior.
For example, if you select the Don't Change setting, each associated device uses its own
preference settings to determine how long an idle Windows CE device waits until it turns itself
off. If you want to ensure consistency across all associated Windows CE devices, select the
appropriate setting.
If you select the Disable setting, ZENworks Handheld Management disables that setting on all
associated Windows CE devices; the power of Windows CE devices is turned off.
9 On the Files page, do the following:
9a Click Add.
9b In the Add Files to Delete from Handheld dialog box, specify the complete path of the file
and the filename.
58 Novell ZENworks 7 Handheld Management Administration Guide