Viewing Hardware Inventory - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

2 Click Configure, then click Software Inventory Rules.
The Software Inventory Rules dialog box lists any files you have identified or ignored.
You can change any rule by selecting the rule, then clicking Edit. You can also identify or
ignore a file by clicking Add, then creating the rule. You can even create a rule for files that
have not been installed on your devices yet.
To view rules for a specific file:
1 In ConsoleOne, right-click a handheld device object, click Actions, then click Inventory.
2 Double-click an unidentified or ignored file.
3 Click the Rules tab.
All user-defined ignore and identification rules that match the name of the file appear.

5.2 Viewing Hardware Inventory

ZENworks Handheld Management collects hardware information from each handheld device in
your system, including the model, OS version, processor type, free RAM, RAM used, battery type
and remaining charge on the battery.
Collected data about hardware is stored on a per-device basis and is found on the ZENworks
Inventory page in ConsoleOne or on the Clients: Hardware Inventory page in the Inventory Viewer.
Hardware inventory data is collected every time the handheld device connects to the ZENworks
Handheld Management Access Point.
To view hardware inventory using ConsoleOne:
1 In ConsoleOne, right-click a handheld device object, then click Properties.
120 Novell ZENworks 7 Handheld Management Administration Guide