Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual page 61

5 In the Access Points page, do the following:
5a If you want to add the ZENworks Handheld Management Access Points to the Configure
IP Address /DNS Name of Access Points list, and define the order of the ZENworks
Handheld Management Access Points to which the handheld device must connect to,
select the Enable Following Access Points option.
If you do not select this check box, the ZENworks Handheld Management Access Points
list is not available on the handheld device.
5b Click Add.
5c In the Add Access Points dialog box, specify the IP address or the full DNS name of the
ZENworks Handheld Management Access Point, or click Select. If you specify the IP
address or the full DNS of the ZENworks Handheld Management Access Point, skip to
Step 5h.
5d By default, the service object of the Handheld Management server is displayed. To select
another service object, click the Browse icon, select the service object, then click OK.
5e Click Display.
The IP address of the ZENworks Handheld Management Access Points associated with
service object is displayed
5f From the ZENworks Handheld Management Access Points list, select the IP address of the
ZENworks Handheld Management Access Point to which you want to connect the device.
5g Click OK.
The ZENworks Handheld Management Access Points IP address followed by a semicolon
(;) is displayed in the Access Points option.
5h (Optional) To add another ZENworks Handheld Management Access Point, repeat
through Step 5g.
Using ZENworks Handheld Management Policies
Step 5c
61