Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual page 135

To configure network usage restrictions:
1 Run from the
console.exe
2 Click Operations > Configure Communications.
3 Click Network Usage Restrictions in the Network Settings page.
4 Specify the settings in the fields:
LAN Adapter: The proxy service tries to make a TCP/IP connection to the ZENworks
Handheld Management server using the installed LAN adapter (this is how a normal
connection would be made by a proxy service directly connected to the LAN).
Because the proxy service periodically tries to connect to the server, this option should be
disabled if there is no way to connect to the ZENworks Handheld Management server via the
LAN. For example, if the user is in a remote office that never directly connects to the LAN but
has a LAN adapter installed.
Dial-Up Phone Book Entries: Lists the current dial-up networking connections that have been
configured on the proxy service.
You might want to disable a dial-up connection in order to limit the bandwidth used by a
specific connection. For example, you might not want ZENworks Handheld Management to
use a dial-up connection that is used strictly for a cellular modem.
Dial-Up Bandwidth Usage: Allows you to set how much bandwidth ZENworks Handheld
Management can use when transferring messages over dial-up connections. By default, proxy
services uses the maximum bandwidth available.
On occasion, the user might want to limit the bandwidth ZENworks Handheld Management
uses, especially if other processes are using the dial-up connection at the same time ZENworks
Handheld Management is transferring messages.
For example, if users are downloading large files from the network, they might want to limit
the amount of bandwidth ZENworks Handheld Management is using so that the file download
finishes faster. If necessary, you can also disable message transfers to keep ZENworks
Handheld Management from sending messages. For more information, see
Disabling Message Transfers" on page
directory (by default,
zfhap
136.
program files\novell\zfhap
"Enabling or
Making System Configuration Changes 135
).