Handheld Application Search Policy - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

Object Container: Search from the handheld device object to the parent container of the
object.
Partition: Search from the object to the partition.
Selected Container: Search from the handheld device object to the selected container.
5 If you chose Selected Container, browse to select the container.
6 To determine the searching limits in either direction, specify a number between -25 and 25.
7 Click the Search Order tab.
8 Specify the policy searching order, using the arrow keys, the Add button, and the Remove
button as necessary.
NOTE: Depending on which other ZENworks products (ZENworks Desktop Management and
ZENworks Server Management) are present, ConsoleOne might display a Refresh Interval
page; however, ZENworks Handheld Management does not use the settings on the Refresh
Interval page.
9 Click OK.
10 When you have finished configuring all of the policies for this package, continue with the steps
under

2.3.3 Handheld Application Search Policy

The Handheld Application Search policy is used to limit how far up the tree ZENworks Handheld
Management searches for Handheld Application objects.
26 Novell ZENworks 7 Handheld Management Administration Guide
"Associating the Container Package" on page 29 to associate the policy package.