Configuring Ssl And Http Communication Between The Zenworks Handheld Management Access Point And The Handheld Devices - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 - ADMINISTRATION Administration Manual

To publish a trusted SSL root certificate:
5a In the Configure IP dialog box, click Configure Root Certificate.
5b Browse to and select the signed root certificate, then click Open.
The root certificate that you get from a Certificate Authority (CA) must be in Base64
format.
5c Click OK twice.
6 To enable SSL on the ZENworks Handheld Management server, select the Enable SSL check
box.
7 To enable HTTP on the ZENworks Handheld Management server, select the Enable HTTP
check box.
8 To enable SSL/HTTP on the Access Point:
8a Run the
8b Select Operations > Configure > Server Communications.
8c To select SSL, select the Use SSL check box. If the server certificate is signed by non-
standard certificate authority, then select the Accept Next Root Certificate check box.
8d To enable HTTP, select the Use HTTP Encapsulation check box.
8e Click OK.
B.2 Configuring SSL and HTTP Communication
between the ZENworks Handheld Management
Access Point and the Handheld Devices
You can configure the SSL and HTTP communication between the ZENworks Handheld
Management Access Point and the Handheld devices by using
160 Novell ZENworks 7 Handheld Management Administration Guide
file from the
console.exe
directory.
zfhap
cfgip.exe
from the directory.
zfhap