2 In the Configure IP- ZENworks Handheld Management Server dialog box, do the following:
2a Deselect the Use Default option.
2b Type the desired TCP, SSL, HTTP, and HTTPS ports that you want the ZENworks
Handheld Management Server to use.
2c Click OK.
3 Configure the ZENworks Handheld Management Access Point to connect to the new ports.
3a Run
3b Select Operations > Configure > Server Communication.
3c Deselect the Use Default Port option.
3d Type the desired port that you want the ZENworks Handheld Management Access Point
to use for communicating with the ZENworks Handheld Management Server.
4 Click OK.
A.4 Changing the Default Ports for the ZENworks
Handheld Management Access Point and the
Handheld Devices Communication
1 During installation, if you have selected the Configure Access Point HTTP and SSL settings
option, do the following in the Configure IP - ZENworks Handheld Management Access Point
dialog box:
1a Deselect the Use Default Ports option.
1b Type the desired TCP, SSL, HTTP, and HTTPS ports that you want the ZENworks
Handheld Management Access Point to use.
88
Novell ZENworks 7 Handheld Management Installation Guide
from the
console.exe
ZFHAP
folder.