Configuring Ssl And Http Communication Between The Zenworks Handheld Management Access Point And The Handheld Devices - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual

To publish a trusted SSL root certificate:
5a In the Configure IP dialog box, click Configure Root Certificate.
5b Browse to and select the signed root certificate, then click Open.
The root certificate that you get from a Certificate Authority (CA) must be in Base64
format.
5c Click OK twice.
6 To enable SSL on the ZENworks Handheld Management server, select the Enable SSL option.
7 To enable HTTP on the ZENworks Handheld Management server, select the Enable HTTP
option.
8 To enable SSL/HTTP on the ZENworks Handheld Management Access Point:
8a Run
8b Select Operations > Configure > Server Communications.
8c To enable SSL, select the Use SSL option. If the server certificate is signed by a non-
standard certificate authority, then select the Accept Next Root Certificate option.
8d To enable HTTP, select the Use HTTP Encapsulation option.
8e Click OK.
A.2 Configuring SSL and HTTP Communication
between the ZENworks Handheld Management
Access Point and the Handheld Devices
You can configure SSL and HTTP communication between the ZENworks Handheld Management
Access Point and the Handheld devices during the installation or by using
folder).
ZfHAP
84 Novell ZENworks 7 Handheld Management Installation Guide
from the
console.exe ZfHAP
folder.
(located in the
cfgip.exe