Alcatel OmniSwitch 6624 Troubleshooting Manual page 74

Advanced Troubleshooting
format text
format all
output screen
output switchlog
board cmm
board ni
board all
board none
If the problems are associated with the source learning on a specific NI then the limitations of the Number
of MAC addresses learned should also be considered. Current limitations are:
Number of learned MAC
addresses per network interface
(NI) module
Number of learned MAC
addresses per switch
The total number of MAC addresses learned per switch can be viewed using the command:
-> show mac-address-table count
Mac Address Table Count:
Permanent Address Count
DeleteOnReset Address Count
DeleteOnTimeout Address Count
Dynamic Learned Address Count
Total MAC Address In Use
If the problem is still not resolved then kindly contact Tech Support for further troubleshooting.
page 3-6
Debugs the packet text.
Debugs the entire packet.
Output will appear on screen.
Output will be saved to a log file.
Debugs CMM packets.
Debugs packets for a Network Interface (NI). To debug a specific inter-
face, enter ni, then enter the slot number of the NI.
Debugs packets for all CMMs and NIs on the switch
Clears the previous board settings.
32K
64K
= 0,
= 0,
= 0,
= 36,
= 36
OmniSwitch Troubleshooting Guide
Troubleshooting Source Learning
September 2005