Alcatel OmniSwitch 6624 Troubleshooting Manual page 516

debug hre history
Displays the history of the Hardware Routing Engine (HRE).
debug hre history slot/slice
Syntax Definitions
slot
slice
Defaults
N/A
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
OS-66000 series does not have a HRE so this commands is not supported on these switches.
Examples
-> debug hre history 11/0
IP flush all count = 0
IP flush net count = 886
last net = 0a286c04, last mask = ffffffff
last time = 140 seconds ago by 15
ARP flush count = 514
last next hop ip address = 0a286c04
last time = 140 seconds ago by 15
IPMS flush all count = 1
last time = 12826 seconds ago by 17
IPX flush all count = 1
last time = 12823 seconds ago by 16
IPX flush net count = 0
Aging period is 30 seconds
0 PCAM entries created, 0 entries aged in last cycle
Release History
Release 5.1; command was introduced.
page -130
Specifies an NI slot number.
Specifies an NI slice (ASIC) number.
OmniSwitch Troubleshooting Guide September 2005