Alcatel OmniSwitch 6624 Troubleshooting Manual page 416

ip pimsm debug-type
Configures the type(s) of PIM-SM debug messages to display.
ip pimsm debug-type message_list
no ip pimsm debug-type message_list
Syntax Definitions
message_list
supported message types
all
assert
bootstrap
crp
error
hello
igmp
ipmrm
init
joinprune
mip
misc
nbr
route
spt
time
tm
Defaults
N/A
page -30
Specifies the type(s) of PIM-SM messages to be debugged. Select
supported PIM-SM message types from the list below. You may enter
multiple message types in any order. For example, ip pimsm debug-
type time flash init.
descriptions
Enables or disables PIM-SM debugging for all items listed below. The
syntax all can be used to easily turn debugging for all message types on
or off.
Enables or disables debugging for Assert Metric messages.
Enables or disables debugging for Bootstrap Router (BSR) messages.
Enables or disables debugging for Candidate Rendezvous Point (C-RP)
messages.
Enables or disables debugging for PIM-SM Error messages.
Enables or disables debugging for PIM-SM Hello messages.
Enables or disables debugging for Internet Group Management Protocol
(IGMP) messages.
Enables or disables debugging for messages exchanged with IP Multi-
cast Routing Manager (IPMRM).
Enables or disables debugging related to PIM-SM initialization code.
Enables or disables debugging related to Join/Prune.
Enables or disables debugging related to MIP (Management Internal
Protocol).
Enables or disables miscellaneous debugging of PIM-SM.
Enables or disables debugging for PIM-SM Neighbor processing.
Enables or disables debugging for PIM-SM Route processing.
Enables or disables debugging related to Shortest-Path Tree (SPT).
Enables or disables debugging for PIM-SM Timer processing.
Enables or disables debugging for PIM-SM Task Manager interaction.
OmniSwitch Troubleshooting Guide September 2005