Alcatel OmniSwitch 6624 Troubleshooting Manual page 407

ip mroute debug-type
Displays the current multicast routing debug levels and types.
ip mroute debug-type [tm | protos {on | off} | misc | mip {on | off} | ipms {on | off} | init | fib {on | off} |
error {on | off} | all | aging {on | off}]
no ip mroute debug-type [tm | protos {on | off} | misc | mip {on | off} | ipms {on | off} | init | fib {on |
off} | error {on | off} | all | aging {on | off}]
Syntax Definitions
debug level
protos
mip
ipms
fib
error
aging
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
Use the no form of the command to turn off a specific type of debug or all debug types.
Examples
-> debug ip mroute debug-type error
Release History
Release 5.1; command was introduced.
Related Commands
debug ip mroute debug-level
OmniSwitch Troubleshooting Guide
The current debug level value.
The current state of messages related to multicast routing protocols
(e.g., whether they are enabled or disabled on interfaces, which proto-
cols are going up or down, etc.).
The current state of messages related to MIP (Management Internal
Protocol).
The current state of messages related to IPMS interaction.
The current state of messages related to IPMRM FIB processing.
The current state of messages related to all error handling.
The current state of messages related to IPMRM FIB aging entries.
Configures the Mutlicast Routing debug level.
September 2005 page -21