Alcatel OmniSwitch 6624 Troubleshooting Manual page 317

Troubleshooting 802.1X
Authentication
IP Router Port
IPX Router Port
6 Verify the status of the 802.1x port using the show 802.1x command. Read the OmniSwitch CLI Refer-
ence Guide to understand the explanation for each field.
Layer-2: show 802.1x 2/3
802.1x slot/port = 2/3
authenticator PAE state
backend authenticator state = IDLE,
direction
operational directions
port-control
port status
quiet-period (seconds)
tx-period (seconds)
supp-timeout (seconds)
server-timeout (seconds)
max-req
re-authperiod (seconds)
reauthentication
7
Check for the 802.1x port statistics. Read the OmniSwitch CLI Reference Guide to understand the
detail of each field.
Layer-2: show 802.1x statistic 2/3
802.1x slot/port = 2/3
EAPOL frames received
EAPOL frames transmitted
EAPOL start frames received
EAPOL logoff frames received
EAP Resp/Id frames received
EAP Response frames received
EAP Req/Id frames transmitted
EAP Req frames transmitted
Invalid EAPOL frames received
EAP length error frames received = 0,
Last EAPOL frame version
Last EAPOL frame source
OmniSwitch Troubleshooting Guide
: enabled,
: none,
: none,
= AUTHENTICATED,
= both,
= both,
= auto,
= Authorized,
= 60,
= 30,
= 30,
= 30,
= 2,
= 3600,
= no
= 28,
= 38,
= 8,
= 0,
= 10,
= 10,
= 13,
= 10,
= 0,
= 1,
= 00:0f:1f:d5:54:95
September 2005
Troubleshooting with the CLI
page 19-3