Alcatel OmniSwitch 6624 Troubleshooting Manual page 561

egress
rsvp
balance
nimsg
Defaults
By default basic information messages are logged (info). Error messages are always logged.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Use this command to troubleshoot QoS events on the switch.
•
Use the no form of the command to change the type of messages that will be logged or to return debug-
•
ging to its default state.
Examples
-> debug qos flows queue
-> qos debug no flows no queue
-> debug no qos
Release History
Release 5.1; command was introduced.
MIB Objects
alaQoSConfigTable
alaQoSConfigDebug
OmniSwitch Troubleshooting Guide
Logs information about packets leaving the switch.
Logs information about RSVP flows. Currently not supported.
Logs information about flows that are part of a load balancing cluster.
Not supported for the OmniSwitch 6624/6648.
Logs information about QoS interfaces.
September 2005 page -175