Alcatel OmniSwitch 6624 Troubleshooting Manual page 160

Troubleshooting QoS
To view the QoS log, use the show qos log command. The display is similar to the following:
-> show qos log
**QOS Log**
Validate classify: valid
Conditionop noip (3)
Validate condition: valid
Conditionop noip (3)
Validate condition: valid
Conditionop noip (1)
Actionop noip (3)
Validate action: valid
Actionop noip (1)
Ruleop(0) noip (3)
Validate rule: valid
Ruleop(0) noip (3)
Validate rule: valid
Ruleop(0) noip (1)
Update rule 0 with flags 9000402f
Update cond noip for rule 0 (1)
Update QOS_CONDITION_NAME for rule 0 (1)
Update QOS_CONDITION_SRCIPADDRMASK for rule 0 (1)
Classify on item 75 for 0 (1,1)
Update QOS_CONDITION_L3SRCIPADDR for rule 0 (1)
Update QOS_CONDITION_L3SRCIPMASK for rule 0 (1)
Update QOS_CONDITION_STATUS for rule 0 (1)
Validate classify: valid
Validate classify: valid
Validate config: valid
Validate config: valid
Apply QoS configuration
Validate config: valid
Validate config: valid
Apply QoS configuration
Ruleop(0) oktftp (2)
Validate rule: valid
Ruleop(0) oktftp (2)
Validate rule: valid
Ruleop(1) oktftp (0)
Update cond oktftp for rule 1 (0)
page 10-10 OmniSwitch Troubleshooting Guide
Troubleshooting QoS
September 2005