Alcatel OmniSwitch 6624 Troubleshooting Manual page 408

ip ospf debug-level
Configures OSPF debugging level. The level refers to the granularity of the information provided. Gener-
ally, the higher the number, the more specific the information.
ip ospf debug-level level
Syntax Definitions
level
Defaults
parameter
level
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
This command allows you to select the granularity at which you wish to view debugging information.
Currently, in OSPF, there are three levels available:
10–Only critical errors and warnings.
•
50–Most errors, warnings, and events.
•
99–All errors, warnings and events.
•
Examples
-> ip ospf debug-level 10
Release History
Release 5.1; command was introduced.
Related Commands
ip ospf debug-type
show ip ospf debug
MIB Objects
ALAOSPFDEBUGCONFIG
alaOspfDebugLevel
page -22
The debugging level. The valid range 0–255.
default
0
Configures type of OSPF functionality to debug.
Displays current OSPF debug level and types.
OmniSwitch Troubleshooting Guide September 2005