Alcatel OmniSwitch 6624 Troubleshooting Manual page 44

Dshell Troubleshooting
output definitions (continued)
Local Mac
Role
Nb
In_loop
Neighbor1
Topology Role
Topology Outport
Topology base Mac
Lookup
Hop
Gport
Lport
Status
To view the stack topology in detail, use the following command:
Working: [Kernel]->stack_topo
local_slot=1 role=PRIMARY P=1 S=2 (elements=0x300ff nb=8 loop=1 sup=2 type=2)
7 elements seen by link1 (gport=0x1a lport=0x1a status=1)
slot=8 originate_port=26 role=IDLE
slot=7 originate_port=27 role=IDLE
slot=6 originate_port=26 role=IDLE
slot=5 originate_port=27 role=IDLE
slot=4 originate_port=26 role=IDLE
slot=3 originate_port=27 role=IDLE
slot=2 originate_port=26 role=SECONDARY
7 elements seen by link2 (gport=0x1b lport=0x1b status=1)
slot=2 originate_port=27 role=SECONDARY
slot=3 originate_port=26 role=IDLE
slot=4 originate_port=27 role=IDLE
slot=5 originate_port=26 role=IDLE
slot=6 originate_port=27 role=IDLE
slot=7 originate_port=26 role=IDLE
slot=8 originate_port=27 role=IDLE
NI=1 CMM=65 role=1
* state_linkA=1 remote_slotA=8 remote_linkA=51
* state_linkB=1 remote_slotB=2 remote_linkB=52
NI=2 CMM=66 role=2
* state_linkA=1 remote_slotA=3 remote_linkA=27
* state_linkB=1 remote_slotB=1 remote_linkB=52
NI=3 CMM=0 role=3
* state_linkA=1 remote_slotA=2 remote_linkA=51
* state_linkB=1 remote_slotB=4 remote_linkB=52
page 1-24
Local Mac address used for IPC communication across the stacking
cables.
Primary or Secondary.
Neighbor ID (1-Based).
1 if the stacks are connected in a loop for redundant path.
Shows the connections to other stacks through the port number.
1=Primary, 2= Secondary, 3=Idle.
Displays the port used to access the other stacks.
Displays the base mac addresses of all the other stacks.
The stacking port to be used to do a lookup for another stack.
Displays the hops for each stack to the other stack.
Global port used for stacking (either stack_number a or stack_number
b).
Logical port used for stacking (either stack_number a or stack_number
b).
1=up, 0=down.
OmniSwitch Troubleshooting Guide
Troubleshooting the Switch System
September 2005