Alcatel OmniSwitch 6624 Troubleshooting Manual page 49

Troubleshooting the Switch System
LocalPool: Full size is 64, remaining: 64
In socket queues: 0 Not queued: 0:
DMA queues: 0
In the above two outputs it seems that the control pool is stuck and the socket queues are incrementing. In
order to find out which task is using these queues we need to look at the socket information.
To look in detail about these pools the following commands can be used in Dshell:
Ipc_urgent_pools_detail number
•
Ipc_control_pools_detail number
•
Ipc_normal_pools_detail number
•
Ipc_jumbo_pools_detail number
•
Ipc_local_pools_detail number
•
The above commands have an option to specify the number of sockets to be displayed in Dshell. If no
number is specified then it will display all the sockets in use which can be real problem in case of thou-
sands of sockets being used.
Working: [Kernel]->ipc_control_pools_detail
ipc_control_pools_details
ControlPool: Full size is 5096, remaining: 5090
Socket ID = 0x3, dest slot = 66, remote addr = 0x0, ipc status = D
Task ID = 0x67f3c10, PayLoad Len= 68,
8
next = 0x0, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
Socket ID = 0x5, dest slot = 66, remote addr = 0x8400041, ipc status = D
Task ID = 0x67f3c10, PayLoad Len= 68,
8
next = 0x0, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
Socket ID = 0x8, dest slot = 66, remote addr = 0xf400042, ipc status = G
Task ID = 0x6862660, PayLoad Len= 64,
8
next = 0x6818ba4, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
Socket ID = 0x8, dest slot = 66, remote addr = 0xf400042, ipc status = G
Task ID = 0x6862660, PayLoad Len= 64,
8
next = 0x68231d8, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
Socket ID = 0x8, dest slot = 65, remote addr = 0x5090041, ipc status = S
Task ID = 0x6862660, PayLoad Len= 68,
8
next = 0x0, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
Socket ID = 0x1, dest slot = 66, remote addr = 0x10400042, ipc status = G
Task ID = 0x6862660, PayLoad Len= 64,
8
next = 0x0, pFreeQ = 0x6f565d0, data_offset = 0, free_list_num = 3
In socket queues: 1 Not queued: 3:
In DMA queues: 2
OmniSwitch Troubleshooting Guide
Troubleshooting IPC on OS-6/7/8XXX Series of Switches
ipc priority = 0x1, data ptr = 0x5e09f9
ipc priority = 0x1, data ptr = 0x5e09ff
ipc priority = 0x1, data ptr = 0x5e0a1d
ipc priority = 0x1, data ptr = 0x5e1ba5
ipc priority = 0x1, data ptr = 0x5e202b
ipc priority = 0x1, data ptr = 0x5e6999
September 2005 page 1-29