Alcatel OmniSwitch 6624 Troubleshooting Manual page 192
Alcatel internetworking, inc. switch troubleshooting guide
Hide thumbs
Also See for OmniSwitch 6624:
- Network configuration manual (546 pages) ,
- Management manual (264 pages) ,
- Hardware user's manual (114 pages)
Table of Contents
Advertisement
RIP Troubleshooting
error
warning
recv
send
rdb
age
redist
info
setup
time
all
Any combination of debug-types can be set.
Lets look at all the RIP debug messages by using the option all:
-> ip rip debug-type all
-> ip rip debug-level 255
tRip-:
processRipNetQueue: Enter.
tRip-:
processRipNetQueue:
tRip-:
ripRecv:Received packet from 11.40.211.4
tRip-:
ripRecv:Received my own packet on VLAN 2
tRip-:
processRipNetQueue:
tRip-:
ripRecv:Received packet from 11.40.211.1
tRip-:
ripRecv: Rx: RESP ver=v1 src=11.40.211.1 inIf=11.40.211.4 port=520
tuples=12 len=244
(Received RIP packet from interface 11.40.211.1, version 1 with 12 routes.)
tRip-:
ripPeerLookupEntry: looking for peer->11.40.211.1
tRip-:
ripPeerAddEntry: Adding Peer->11.40.211.1 to PeerTable
tRip-:
ripPeerLookupEntry: looking for peer->11.40.211.1
tRip-:
ripPeerRefreshAgeoutTimer: peer->11.40.211.1 age set to 68
tRip-:
ripPeerLookupEntry: looking for peer->11.40.211.1
(Looking in peer table, if the peer 11.40.211.1 already exists or not.)
tRip-:
in ripRdbLookup for 0.0.0.0 (0.0.0.0)
tRip-:
Adding 0.0.0.0/0->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 6.0.0.0 (255.0.0.0)
tRip-:
Adding 6.0.0.0/8->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 8.0.0.0 (255.0.0.0)
tRip-:
Adding 8.0.0.0/8->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 10.10.41.57 (255.255.255.255)
tRip-:
Adding 10.10.41.57/32->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 10.10.42.57 (255.255.255.255)
tRip-:
Adding 10.10.42.57/32->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 10.10.42.159 (255.255.255.255)
tRip-:
Adding 10.10.42.159/32->11.40.211.1 to FIB
tRip-:
in ripRdbLookup for 11.40.1.0 (255.255.255.0)
page 12-16
Includes error conditions, failures, processing errors, etc.
Includes general warnings, non-fatal conditions.
Enables debugging in the receive flow path of the code.
Enables debugging in the send flow path of the code.
Debugs RIP database handling.
Debugs code handling database entry aging/timeouts.
Debugs redistribution code.
Provides general information.
Provides information during initialization.
Debugs timeout handler.
Enables all debug options.
Received RIP packet:24
Received RIP packet:244
OmniSwitch Troubleshooting Guide
Troubleshooting IP Routing
September 2005
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
