Alcatel OmniSwitch 6624 Troubleshooting Manual page 413

output definitions
Debug Level
error
warning
state
recv
send
flood
spf
lsdb
rdb
age
vlink
redist
summary
dbexch
hello
auth
area
intf
mip
info
setup
time
tm
Release History
Release 5.1; command was introduced.
Related Commands
ip ospf debug-level
ip ospf debug-type
OmniSwitch Troubleshooting Guide
The granularity of the debug messages. This number will be 10, 50, or
99, where the lower number is least specific.
The error debug messages status. Error messages provide information
of program faults.
The warning debug messages status. Debugging messages show router
operation calls.
The state debug messages status. State messages show the router state
in relation to its neighbors.
The received OSPF packet debug messages status.
The status OSPF packet debug messages status.
The flood debug messages status.
The Shortest Path First (SPF) debug messages status.
The Link State Database (LSDB) debug messages status.
The Routing Database (RDB) debug messages status.
The aging debug messages status.
The virtual link debug messages status.
The redistribution debug messages status.
The summary debug messages status. Summarization of routes can be
set for stubby areas and NSSAs.
The data base exchange debug messages status.
The hello debug messages status.
The authorization debug messages status.
The area related debug messages status.
The interface related debug messages status.
The MIP operations debug messages status.
The information debug messages status.
The setup debug messages status.
The time debug messages status.
The DRC debug messages status.
Configures OSPF debugging level.
Configures type of OSPF traffic to debug.
September 2005 page -27