Initiate The Telnet Authentication - Alcatel OmniSwitch 6624 Troubleshooting Manual

Troubleshooting Using Debug Systrace

Initiate the Telnet Authentication

-> 2394037098 AAA
2394037225 AAA
2394037384 AAA
2394037565 AAA
0x60008 00.00.00.00.00.00
2394037621 AAA
2394037675 AAA
2394037721 AAA
2394037768 AAA
2394080316 AAA
admin, Ret = OKdebug1 begin Authent Evt : Req, St : IDLE, name : admin, Rec ses
: 60008/ (TRUNCATED)
2394277037 AAA
2394321109 AAA
2394385614 AAA
2394451209 AAA
0x1e0020
23945393902394539440
from N[RAD] radMain : messo link, set in Chal_age received from AARsp linkA
23947124523947125147
RESP1, name :[RAD] Message Authen admin, ses : 60008/tication Request - m
Ret = OKsgID = 140026 - received from(TRUNCATED)
2394930753 AAA
2394997268 AAA
2395083317 AAA
2395148871 AAA
0x8502fdfc
2395234856 AAA
2395323003 AAA
2395387501 AAA
2395474782 AAA
try=1
2395562721 AAA
try=1
2395671413 AAA
7, code 2, length 59
2395779908 AAA
2395845441 AAA
rcvd.
2395955105 AAA
2396019598 AAA
length 6
2396106681 AAA
protobind=0
2396216328 AAA
(admin)
2396302335 AAA
msgID = 140046(TRUNCATED)
2396412150 AAA
2396499091 AAA
name : admin, Rec(TRUNCATED)
2396607639 AAA
2396650688 AAA
2396716214 AAA
23967818172396781906
aaa_useruth Reply Ok,St : WAReturnST_IDLEIT RESP, name : admin Avla2396933365n
se(TRUNC ATED)AAA 2396977 445debug1
page 18-6
debug1 Send AAA_HDL_MGT_USER_REQ
debug1 Message succefully sent
debug3 Entering in aaa_ProcessHdlMsg
debug1 AVLAN begin Evt : Req,St : IDLE, name :
debug3 aaaAvlanUserReq ses rec 0x3ef, Avlan ses 0x60008
debug1 Ctx admin removed from No link, set in MAC link
debug3 aaaAvlanFormatSendAuthReq
debug1 Send Auth. Req. to AAA name : admin, Avlan ses 60008
debug12394080448 AVLAAAAN end St : WAIT
debug3 Entering in aaaAuthentReq
debug3 Entering in aaa_ProcessAuthent
debug3 Entering in aaa_FormatSendAuthReq
debug1 Send Auth/Log to RADIUS for admin, Refser:0x2 AAA ses
AAAAAA debug1deb ug3AAA_Serv>> Ctx a dmin removed
AAAAAA debug1info
info [RAD] radBuildServeurAuth : id = 7
info [RAD] radAddAttr : adding attribute type 1
info [RAD] radAddAttr : adding attribute type 2
info [RAD] radBuildServeurAuth : RADIUS client address =
info [RAD] radAddAttr : adding attribute type 4
info [RAD] radAddAttr : adding attribute type 5
info [RAD] rad_buildauth: port 1 added to access-request
info [RAD] radDoSend OK : id=7, addr=0x8502fd01 port=1645
info [RAD] radDoSend OK : id=7, addr=0x8502fd01 port=1645
debug3 [RAD] radProcPkt: Got a reply from Radius server , id =
info [RAD] radProcPkt: Attribute type 25, length 27
info [RAD] radProcPkt: classe (_SBR-CL DN="ADMIN" AT="0"_)
info [RAD] radProcPkt: Attribute type 26, length 12
info [RAD] radProcPkt: Xylan-specific attribute type 1,
info [RAD] radAddAuthGroup :numOfVlans=1, groupeNbr=103,
info [RAD] radProcPkt: RADIUS authentication succeeded
info [RAD] radSendMsgToAaa : message Authentication Reply -
debug3 in aaa_DispatchClientRsp,msgId=0x140046
debug1 begin Authent Evt : Auth Reply Ok, St : WAIT RESP1,
debug3 Entering in aaa_AuthRspOK
debug3 Entering in aaa_ReplyHdlMgt
debug1 Send auth Success, session 60008
AAAAAA debug1debug3
AAAAAA_S
Troubleshooting Authenticated VLANs
End Authent Evt St :
AVLAN begin Evt : AEntering in
erv>> Ctx admin r emoved from
OmniSwitch Troubleshooting Guide
Avlan ses
RESP, name :
WAIT
7,
September 2005