Small Stereo Adjust - Lexicon 300L - REV Owner's Manual

The Small Stereo Adjust algorithm is a scaled-down version of Stereo Adjust with
some of the specialized features omitted. It is designed to be put in Cascade
Setups ahead of PONS or Compressors.
MST
OFF, -72.05DB TO +12DB
TXO
0.1-26.5KHZ CUT, -18DB - +6DB CUT, -18DB - +6DB
Master
Stereo Adjustments Page One
MST is a stereo level control, with both channels equally attenuated or boosted.
From -12 to +12dB the fader moves in .25 dB increments. Below -12dB it moves
in .50 dB increments. Below -60dB the calibration comes in larger steps, finally
dropping to zero output at -72dB.
BAL implements a sine/cosine balance adjustment. Balance is smoothly ad-
justed over a wide range, with excellent resolution in the critical area around
zero. The display indicates the actual channel gains as the control is varied.
These are 6dB/octave shelving EQ controls with a range of +6 dB boost and -
18dB cut. They move in .50 dB steps from +6 to -6 dB. The crossover point is
adjusted with TXO.
BXO sets the crossover point for the BAS controls. When these are set to full
cut, the level is -3 dB at the frequency set with BXO.
BAL BAS
L+3 TO R+3 CUT, -18DB - +6DB
TBL TBR
Balance
PAGE ONE
BAS
CUT, -18DB - +6DB
PAGE TWO
ROT
L+3 TO R+3
Equalizer
BAS
Rotate
TBL
SPEQ
The Algorithms and their Parameters
Small Stereo
Adjust
General Description

Small Stereo Adjust

Parameters
BXO SPEQ
0.1-26.5KHZ CUT, -6.00 TO +6.00DB
BAS BXO
TBR TXO
MST (Master Fader)
BAL (Balance)
BAS (EQ Shelving)
BXO (Bass Crossover)
4-33