Trimming Time Codes In The Event List - Lexicon 300L - REV Owner's Manual

The TYPE slider allows you to define the type of automation event which occurs
at the assigned time code number. The choices are:
S: Setup (This must be the first entry in any Event List.)
MA: Effect change for Machine A
MB: Effect change for Machine B (will change only if a split type
Setup is running)
PA: Parameter glide for Machine A
PB: Parameter glide for Machine B (will change only if a split effect
is running in Machine B
PS: Parameter glide for current running Setup.
The SEL slider allows you to scroll through the items associated with the TYPE
of event you define.
For instance, the first event in the list must be a Setup. Select S with the TYPE
slider, then use the SEL slider to select a Setup Preset or Register.
Once you've defined the event edit, press STOre to save your entries. Other-
wise, moving the EDIT slider to select another edit event # will clear your edits.
Once the list is edited, you can test it from Page 7. Use slider 1 to select VIEW.
Locate your source audio to the 5 second pre-roll area. The upper and lower
displays will show:
#00 CUEING
TOP OF LIST
VIEW 0 0 :
Rolling timecode will appear over sliders 2-5 and the upper display will change
according to the requests of the event list.
Note: You may need to trim the timecode value associated with the first event
(Edit #1) to make it occur before the first picture or music.
If you discover an event is too early or late, note the event #, and trim the
timecode for that event. To do this, stop timecode, then press PAGE 8, to display
the Event Edit page. Use the EDIT slider to select the event number (1-50), then
use the TC slider to trim the timecode for that event. Press STOre to save the
timecode trim. If you need a trim value which is outside the available range, press
the TC slider button, and enter in a new timecode value via the keypad or the
sliders. When you are finished, press EXIT, then STOre.
-24 18 12 6 0 6 +12 ovld dB
0 0 : 0 0 :
L
R
0 0
Trimming Time Codes
in the Event List
Time Code Operation
6-5