Lexicon 300L - REV Owner's Manual page 124

MA: B15P2 GUITAR SHIFT
This preset combines a guitar shift effect going into a HARD compressor effect. The LFO controls
the Glide Shift parameter (GLD) in Machine A. The LFO rate is set to 0.16Hz with a sine waveform,
but can be modified with the SoftSlider. This presets works great with stacked BG Vox as well.
MA: B15P2 GUITAR SHIFT
This preset offers a medium amount of micropitch shift(-14c), along with a small amount of
recirculating predelay. Actually, the glide pitch parameter (GLD) is patched to the LFO running in the
Setup. The LFO causes the GLD to glide between -14c and -+7 cents. If you turn off the LFO on Setup
page 4 then return to program edit and move the GLD parameter to -21c, the preset becomes
raunchy sounding on "beefy" guitars.
MB: B16P5 SMAKO!
Alot of Gain (13dB) with alot of Slope (4 : 1) wtih the Threshold a couple of bits down from Dbfs.
Careful !! You may need to adjust Threshold to make it work for the particular signal you're feeding
it. The release parameter rips the signal up within 91 ms.
P137 CC: SURRVERB
MA:B14P7 RECITAL HALL
Machine B (Spatial EQ) has three SoftSlider patches which control the spacial placement of the
source audio - in this case, the output of the reverb effect. In a surround mixing environment,
advancing the SoftSlider parameter will place more of the reverb into the surround channel -
assuming the returns of the 300 are panned hard left and right at the console.
MA: B14P7 RECITAL HALL
This medium large (44.5M) space opens sound sources beautifully. Made for string pads and voice.
MB: B16P9 SPATIAL EQ
This preset is a cut down version of the larger Stereo Adjust program available in Single Setups. This
particular preset has the Soft knob patched to three parameters: Spatial EQ (SPEQ), Bass Left
(BASL), and Bass Right (BASR) boosts and cuts.
P138 CC:V3COMP
MA:B16P6 SMALL ST ADJ
This is a straight ahead digital stereo compressor setup. Use it in a mix insert point or pre-fade send,
or as part of a transfer.
MA:B16P6 SMALL ST.ADJ
This preset is a cut down version of the larger Stereo Adjust program available in Single Setups.
Level, Balance, Rotate, separate Left and Right Bass and Treble, along with spatial eq are available
to adjust. There are no SoftSlider patches in this preset.
MB:B16P1 EZ COMP 2:1
A soft and easy preset to add to an overall mix. You may need to adjust the Threshold parameter
to make it work for the particular signal you're feeding it. Release is set to gently fall away after 363ms.
P139 CC:EQ>DITHER
MA:B16P6 SMALL ST ADJ
This Setup preset places the Small St. Adjust ahead of the dither program. Use the stereo adjust
parameters to control level, balances and eq. Typically this Setup will be used in a mastering or
premastering application.
MA: B16P6 SMALL ST.ADJ
This preset is a cut down version of the larger Stereo Adjust program available in Single Setups.
Level, Balance, Rotate, separate Left and Right Bass and Treble, along with spatial eq are available
to adjust. There are no SoftSlider patches in this preset.
MB: B16P0 PONS+DITHER
This preset has dither turned on and set to PONS (Psycoacoustically Optimized Noise Shaping), with
level of 32. Experiments have shown this to be an optimum starting level of dither.
P140 CC:FILT DLYS
MB: B16P5 SMAKO!
SoftSlider SPATIAL EQ
l B:B16P9 SPATIAL EQ
SoftSlider
MB:B16P1 EZ COMP 2:1
SoftSlider
MB:B16P0 PONS+DITHER
SoftSlider BANDPASS
60
NONE
NONE
40
The Presets
5-21