Small Stereo Adjust - Lexicon 300 - V3.0 REV 1 Owner's Manual

300 V 3.0 Owner's Manual
Small Stereo Ad-
General Description

Small Stereo Adjust

Parameters
MSTR
MSTR (Master Fader)
BAL (Balance)
ROT (Rotate)
4-34
The Small Stereo Adjust algorithm is a version of Stereo Adjust with some of the
specialized features omitted. It is designed to be put in a Cascade Setup ahead
of PONS.
CC:
MchA
CC:
MchA
R F'n'S Balance
Stereo Adjustments Page
MSTR is a stereo level control, with both channels equally attenuated or
boosted. From -12 to +12 the fader moves in .25 dB increments. Below -12 it
moves in .50 dB increments. Below -60 dB the calibration comes in larger steps,
finally dropping to zero output at -72 dB.
BAL implements a sine/cosine balance adjustment. Balance is smoothly ad-
justed over a wide range, with excellent resolution in the critical area around
zero. The display indicates the actual channel gains as the control is varied.
ROT is similar to BAL, but it treats stereo information somewhat differently. Any
signal panned to the center (mono) will be treated by ROT exactly as it would be
treated by BAL. However, if a signal is panned full right and the control is moved
toward the right, instead of simply being attenuated (as BAL would do) the right
channel is inverted in phase and added to the left channel. A stereo image
appears to rotate when this control is used. Ambient information is preserved,
Stereo Adjustments
MSTR
Off, -72dB to +12dB L+2.9 to R+2.9dB
-
- Cut, -6 to +6dB +L+R,+L-R,+R+L,-R+L
Equalization
BASL
Cut, -18dB - +6dB Cut, -18dB - +6dB
BASR
Cut, -18dB - +6dB Cut, -18dB - +6dB
Effect Naming Page
BASL
Rotate
LTRB
SPEQ
BAL ROT
L+2.9 to R+2.9dB
SPEQ RFnS
LTRB BXOV
0.1-26.5kHz
RTRB TXLR
0.1-26.5kHz
Equalizer
BASR BXOV
RTRB TXLR
Lexicon
just