Lexicon 300L - REV Owner's Manual page 80

DL3 (0ms-1000ms) and DL4 (0ms-1000ms) are also picked off after the diffusor.
The level of each is controlled by LV3 and LV4, respectively.
* A quick "double-click" on the DL3 or DL4 slider button will allow you to control
the delay with more resolution. To exit this "fine control" mode, double-click on
the button again.
LV3 and LV4 determine the loudness of DL3 and DL4.
DL5 (0ms-2800ms) and DL6 (0ms-2800ms) allow you to build non-diffused
recirculating echoes independent of the reverberator. Each has a feedback
control (FB5 and FB6).
* A quick "double-click" on the DL5 or DL6 slider button will allow you to control
the delay with more resolution. To exit this "fine control" mode, double-click on
the button again.
FB5 and FB6 provide feedback control for DL5 and DL6.
LV5 and LV6 determine the loudness of DL5 and DL6. These are undiffused pre-
echoes.
The Algorithms and their Parameters
DL3* , DL4*
LV3, LV4
DL5* , DL6*
FB5, FB6
LV5, LV6
4-15