Simm Installation - NEC POWERMATE 4100M Service Manual

Hide thumbs Also See for POWERMATE 4100M:
Table of Contents

Advertisement

3-14
Options

SIMM Installation

Install SIMM sticks into the system board as follows.
Remove the top cover and any expansion boards covering the socket as previ-
1.
ously described.
Insert the SIMM into the SIMM socket at an angle, then push the SIMM upright
2.
so that the clips hold the SIMM in place (see Figure Section 3-1).
1 of 2
Clips
3.
Repeat steps 2 for each SIMM to be installed.
Replace any removed expansion boards.
4.
Replace the top cover and run Setup to reconfigure the computer for the addi-
5.
tional memory (see Section 2, Setup and Operation).
Figure Section 3-1 SIMM Installation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 433dPowermate 466dPowermate 466m

Table of Contents