1/2-Inch Diskette Drive Removal; Inch Diskette Drive Cables - NEC POWERMATE 4100M Service Manual

3 1/2-inch Diskette Drive Removal

Remove the 3 1/2-inch diskette drive as follows.
1. Remove the top cover as previously described.
Unplug the diskette drive power cable and signal cable from the diskette drive
2.
(see Figure Section 6-13).
Figure Section 6-10 3 1/2-Inch Diskette Drive Cables
NOTE: When reinstalling the diskette drive,
note that all power cables are keyed to fit only in
the correct position. The red edge of the diskette
drive signal cable is positioned as shown.
Power Cable
1.2-MB Diskette
Drive Connector
Red Edge
Diskette Drive
Signal Cable
Minitower Repair 6-11