Power Button Screws; Power Supply Removal - NEC POWERMATE 4100M Service Manual
Hide thumbs
Also See for POWERMATE 4100M:
- Service manual (195 pages) ,
- Manual (116 pages) ,
- Manual (31 pages)
Table of Contents
Advertisement
Power Supply Removal
Remove the power supply as follows.
1.
Remove the top cover as previously described.
Unplug the two power cables attached to the system board's connectors.
2.
Unplug the power cables from all installed devices.
3.
4.
Remove the two screws securing the power button to the front of the system unit
(see Figure Section 6-16).
Power
Button
Power Button Screws
(not shown)
Figure Section 6-16 Power Button Screws
Minitower Repair
6-17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
