Diskette Drive Bracket Screws - NEC POWERMATE 4100M Service Manual

6-12 Minitower Repair
3. Remove the two 3 1/2-inch diskette drive bracket screws shown in Figure Section
6-11.
Figure Section 6-11 Diskette Drive Bracket Screws
Slide the 3 1/2-inch diskette drive with bracket out of the system unit. (The
4.
bracket works like a drawer and will stop when fully out.)
5. Remove the four 3 1/2-inch diskette drive screws; two on each side (see
Figure Section 6-13).
6. Remove diskette the drive out from the front of the chassis.
3 1/2-Inch Diskette
Drive Bracket
Screws