Advanced Menu; Integrated Peripherals Menu; Numlock Parameters - NEC POWERMATE 4100M Service Manual

2-16 Setup and Operation
Parameters
Numlock
Keyboard auto-
repeat rate
Keyboard auto-
repeat delay
Key Click

Advanced Menu

Accessing the Advanced menu might require a Supervisor password. Selecting "Advanced"
from the menu bar on the Main Menu displays a menu with the following options:
n
Integrated Peripherals
n
Parity
n
Large Disk Access Mode.
The following sections describe Advanced menu options.

Integrated Peripherals Menu

Select "Integrated Peripherals" menu on the Advanced Menu to configure the connections
between the system processor and the I/O ports (serial port 1, serial port 2, and the printer
port), the diskette drives, and hard disk controllers.
Table Section 2-7 Numlock Parameters
Options
Auto (default)
On
Off
Fast (default)
Medium
Slow
1/4 sec
1/2 sec (default)
3/4 sec
1 sec
Enabled
Disabled (default)
CAUTION: Setting items in this menu to incor-
rect values can cause the system to malfunction.
CAUTION: If the system conditions require
changing COM1, COM2, and LPT port settings,
be sure that these settings match the corre-
sponding system board jumper settings (see Sec-
tion 2).
Description
On or Off turns NumLock on or off at bootup.
Auto turns NumLock on if it finds a numeric key
pad.
Sets the delay time after the key is held down and
before it begins to repeat the keystroke.
Turns audible key click on or off.